EBS-L-P4

P4* Series for Rechargeable battery manufacturing processes Electric actuator Slider type[NEW] Size 12 (body width: 120mm) supported · · A motorless specification of an electric actuator that allows you to install and control motors from each manufacturer. · The Outer Rail System, which unifies the body and the guide, is compact and highly rigid. It has a grease supply port on the outside of the main body and is easy to install and maintain by enabling the top of the main body to be mounted. · · strokes:50~1250mm · Maximum portable mass (horizontal): 110kg · Maximum speed: 1600mm/s · · P4：The use of copper, zinc, and nickel-based materials and electrolytic nickel plating is limited in the construction of the flow path part and sliding part.

• [Space-saving]
• A wide guide, "Outer Rail," is used to support the load. In combination, the proper design of the slider part simultaneously achieves compact and high rigidity, and contributes to space. [Each Motor can be installed]
• A bracket is provided that matches the 12 servo motors and the three stepping motors. Combined with your own motors, it is available under familiar control. Each field network is supported. [Reduced installation time]
• The product can be installed directly from the top or bottom, without removing the cover. This significantly reduces work time, especially when installing from the top. [Easy Maintenance]
• A grease feed port capable of directly feeding grease from the outside is installed on the side of the slider. To maintain a guide and a ball screw by feeding fat from one place without disassembling a body.